Continuous Wave 1064nm Laser for Laser Voltage Imaging and Probing Applications
1064nm Lasers
What are 1064nm Lasers?
1064nm IR Laser Diodes with Diode Pumped Solid State (DPSS) or Continuous Wave (CW) technology.
IR laser diodes are available with both single-mode and multi-mode beam profiles. They have either free space or fiber coupled outputs. The diode laser packages are ideal for OEM applications, and laser modules are available for either OEM or plug and play applications.
| Picture | Part Number | Type | Output power (W) | Mode | Output | Linewidth | Pulse energy (uJ) | Pulse width | Rep rate |
|---|---|---|---|---|---|---|---|---|---|
 | 1064L-1XB | CW DPSS Lasers | 0.300, 0.400, 0.500 | Single-Mode Lasers, Multimode | Free Space, MM Fiber, SM Fiber, PM Fiber, SMA Port | ||||
| | 1064L-2XB | CW DPSS Lasers | 0.200, 0.280, 0.400 | Single-Mode Lasers, Multimode | Free Space, MM Fiber, SM Fiber, PM Fiber | Narrow | |||
 | Aero-1064 | Pulsed DPSS Lasers | 5.0, 10.0 | 50000.0, 100000.0, 200000.0 | 20ns | Single Shot to 50Hz, Single Shot to 100Hz | |||
 | AIRTRAC-LD | Pulsed DPSS Lasers, Mil-Spec Lasers | 1.0 | 50000.0 | 10ns - 25ns | 7-21Hz | |||
 | ALCOR 10XX | Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers | 2.0, 5.0 | 0.025, 0.062 | 100fs, 110fs | 80MHz (Optional: 40MHz) | |||
 | Antares | Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers | 10.0, 20.0, 30.0 | 0.125, 0.250, 0.375, 0.500 | 10ps | 80MHz | |||
 | CEUV Series | Pulsed DPSS Lasers | 5.0, 10.0, 20.0 | 500.0, 1000.0, 2000.0 | 3ns | 10kHz to 1MHz | |||
 | Diadem IR | Pulsed DPSS Lasers, Ultrafast Lasers | 10.0, 20.0, 30.0 | 10.0, 20.0, 30.0, 40.0 | 400fs, 10ps | Single shot to 2MHz | |||
 | LBX-1064 | LD Module | 0.200 | Single-Mode Lasers | Free Space, MM Fiber, SM Fiber, PM Fiber | ||||
 | LCX-1064S | CW DPSS Lasers | 0.100, 0.200, 0.300, 0.400, 0.500 | Single-Mode Lasers | Free Space, MM Fiber, SM Fiber, PM Fiber | Narrow | |||
 | LDX-XXXX-1064 | Single Emitter | 1.5, 3.0, 5.0 | Multimode | Free Space, MM Fiber | ||||
 | neoMOS | Pulsed DPSS Lasers | 5.0, 15.0, 50.0, 75.0, 100.0 | 250.0, 400.0, 500.0 | 600fs, 700fs, 900fs, 10ps, 40ps, 70ps, 100ps | ||||
 | neoVAN | DPSS Amplifiers | 50.0 | 5000.0 | 400ps, CW | ||||
 | NPS-1064 | Pulsed DPSS Lasers, Ultrafast Lasers | 0.050, 5.0, 10.0 | 0.125, 0.250 | 7ps | 40MHz | |||
 | Onda 1064nm | Pulsed DPSS Lasers | 15.0 | 800.0 | 2ns - 12ns | Single Shot to 100kHz | |||
 | Quantas-Q-SPARK-1064 | Pulsed DPSS Lasers | 0.010 | 10000.0 | 800ps, 2ns | 100Hz | |||
 | Quantas-Q1-1064 | Pulsed DPSS Lasers | 0.100, 0.125, 0.160, 0.200, 0.250, 0.300, 0.320, 0.350, 0.500 | 2500.0, 5000.0, 8000.0, 10000.0, 15000.0, 20000.0, 25000.0, 35000.0 | 10ns | Single Shot to 10Hz, Single Shot to 20Hz, Single Shot to 50Hz | |||
 | Quantas-Q2-1064 | Pulsed DPSS Lasers | 0.080, 0.100, 0.150, 0.200, 0.300, 0.350, 0.400, 0.500, 0.600, 0.700, 0.800, 1.0, 1.2, 1.3, 2.0 | 2500.0, 5000.0, 8000.0, 10000.0, 15000.0, 20000.0, 30000.0, 35000.0, 40000.0, 60000.0 | 5ns, 6ns, 7ns, 8ns, 10ns | 10Hz, 20Hz, 33.3Hz, 50Hz, 100Hz, 200Hz | |||
 | Quantas-Q2HE-1064 | Pulsed DPSS Lasers | 1.0, 1.6, 2.0, 3.5, 4.0 | 40000.0, 70000.0, 80000.0, 100000.0 | 6ns | 10Hz, 20Hz, 50Hz, 100Hz | |||
 | R1064 | LD Module, Single Emitter, Volume Bragg Grating (VBG) Laser Diodes | 0.050, 0.150, 0.300, 0.350, 0.600 | Single-Mode Lasers, Multimode | Free Space, MM Fiber, PM Fiber | Narrow | |||
 | R1064.X | Single Emitter, Volume Bragg Grating (VBG) Laser Diodes | 0.050, 0.120, 0.300 | Single-Mode Lasers | Free Space, SM Fiber, PM Fiber | Narrow | |||
 | RPKA64M | Multi-Emitter | 20.0 | Multimode | MM Fiber | ||||
 | RWLD-1064M | Single Emitter | 8.0, 10.0 | Multimode | Free Space | ||||
 | RWLP-1064M | Single Emitter | 1.0, 8.0, 25.0 | Multimode | MM Fiber | ||||
 | RWLP-1064S | Single Emitter | 0.005, 0.010, 0.015, 0.020, 0.030, 0.040, 0.050 | Single-Mode Lasers | SM Fiber, PM Fiber | ||||
 | RXXXXP-EC-AB-XXX-WD-DW | Raman Probes | 0.350 | ||||||
 | SB1-1064 | Pulsed DPSS Lasers, Microchip Lasers | 0.008, 0.012, 0.040, 0.110, 0.150, 0.200, 0.225, 0.400 | 2.0, 15.0, 20.0, 30.0, 40.0, 60.0, 80.0 | 400ps, 1.3ns | 100Hz, 200Hz, 1kHz, 5kHz, 10kHz, 15kHz, 55kHz, 100kHz | |||
 | Sirius IR | Pulsed DPSS Lasers, Ultrafast Lasers | 5.0 | 60.0 | 10ps | Single shot to 1MHz | |||
 | SOL-1064 | Pulsed DPSS Lasers | 6.0, 10.0, 20.0, 30.0, 40.0 | 300.0, 450.0, 900.0, 1500.0, 2000.0 | 5ns - 35ns, 7ns - 35ns, 10ns - 40ns, 10ns - 50ns, 15ns - 60ns | Single Shot to 100kHz | |||
 | Vento-1064 | Pulsed DPSS Lasers | 16.0, 25.0, 40.0 | 600.0, 1000.0, 1500.0 | 500ps - 1.5ns | 50kHz to 120kHz, 80kHz to 200kHz | |||
 | Wedge-HB/XB 1064 | Pulsed DPSS Lasers | 4.0 | 2000.0, 4000.0 | 1.5ns | Single shot to 1kHz, Single shot to 2kHz | |||
 | Wedge-HF/XF 1064 | Pulsed DPSS Lasers | 1.5, 4.0 | 70.0, 180.0 | 400ps - 1.6ns, 700ps - 2.5ns | 10kHz to 100kHz, 50kHz to 200kHz |
Matchbox Series
The Matchbox series offers excellent performance and reliability in an ultra-compact "all-in-one" integrated laser head. They come standard with an integrated internal voltage up-conversion that allows using a 5V power supply while maintaining low noise operation. The monolithic design of the Matchbox Series laser includes thermally stabilized optics in a hermetically sealed housing, ensuring reliable and maintenance-free operation. All the Matchbox series modules include a 12-month warranty and are RoHS compliant. All of these features make them the ideal laser source for integration into commercial flow cytometers.
Aero Series
The Aero Series is a high-energy DPSS laser that operates at less than 15 nanoseconds and with average power up to 200mJ at 1064nm and 100mJ at 532nm. All models come enclosed in an extremely compact and ruggedized single unit with a conductively cooled heatsink with a water-cooled option. It comes with available options for beam expanding and collimating optics. This new laser series is ideal for applications like LIBS, spectroscopy, and Atmospheric LIDAR.
Airtrac-MIL Series
The AIRTRAC-MIL series, from Areté Associates, is a ruggedized, high-shock, ultra-compact, actively q-switched, low-SWaP, DPSS laser, available with >90 mJ of pulse energy. Fully compliant NATO STANAG 3733 configurations for laser designation are available in a complete system weighing less than 1 lb. The athermal design of the AIRTRAC ensures high laser pulse energy, stable performance over the full temperature range with low beam divergence.
Alcor Series
ALCOR is the most advanced femtosecond fiber laser emitting at 920 nm or 1064 nm, designed explicitly for multiphoton microscopy instrumentation and industrial OEM integration, working with 24/7 operation in an ultra-compact, robust and air-cooled format. Featuring the Alcor 920 4W, with the highest average power commercially available, as well as the XSight and FLeX Fiber external modules, allowing for fine & fast gating and power control, GDD precompensation, and fiber-coupling (FleX Fiber). 520 nm, 780 nm, and 1040 nm versions also available.
Antares Series
ANTARES is a picosecond, quasi-continuous wave laser with a high repetition rate up to 80 MHz and a narrow linewidth, in a very compact and robust format. This laser series offers average powers of 1 to 40W at 1030 nm or 1064 nm (upon request) and can be doubled or tripled in the harmonics to answer even the most challenging industrial and scientific applications. ANTARES is ideally suited for applications such as CARS and spectroscopy applications.
CEUV Series
Areté has developed a commercial series of compact and efficient DPSS laser sources, capable of operating over a wide range of pulsing conditions (duty-cycle and PRF), in a low SWaP package, with average power up to ≈5W @ 266nm, 10W @ 355nm or 532nm, 20W @ 1064nm, suitable for airborne applications. The design has been tested in brassboard hardware and a prototype is being developed.
Diadem Series
DIADEM Series is a compact, air-cooled, high energy ultrafast laser for advanced micro-machining applications that require short femtosecond pulse widths. The Diadem is available with up to 40µJ of pulse energy, 30W of average power, and operation up to 1MHz (standard), with pulses below <400 fs and an M² < 1.2. This laser has been specifically designed for demanding medical implantable device and electronics manufacturing as well as high peak power optogenetics applications.
LaserBoxx Low Noise Series
The LaserBoxx low noise Series is a CW diode laser module in a variety of diode wavelengths from 375 to 785nm, with output powers up to 350mW. This compact, self-contained laser module is available in turn-key or OEM versions and utilizes a proprietary alignment-free, monolithic resonator, and comes standard with a graphic user interface with remote diagnostics via USB, RS232, or direct I/O interface.
LaserBoxx SLM Series
The LaserBoxx-SLM Series is a single longitudinal mode (SLM) CW diode laser module available in wavelengths at 633nm, 785nm, and 830nm delivering ultra-narrow linewidths thanks to its excellent temperature stability and low noise current. The Oxxius proprietary, embedded firmware locks the laser on the same mode at each startup. This compact, self-contained laser module is available in turn-key or OEM versions and utilizes a proprietary alignment-free, monolithic resonator, and comes standard with a graphic user interface with remote diagnostics via USB, RS232, or direct I/O interface.
LDX Series
The LDX Series of high power multimode single emitter laser diodes include wavelengths of 400nm – 1900nm. Available in a wide range of output powers and package types.
Nps Series
The new, ultrafast NPS Series features up to 10W average output power, <7ps pulse width, and a 40MHz repetition rate. The transform-limited operation, with a spectral width of < 0.3nm, and remarkably accurate central wavelength (1064.3 +/- 0.1nm) make the NPS Series a suitable candidate for highly efficient amplification by Nd-doped DPSS amplifiers. Therefore, opening the way to nonlinear optics applications like OPO pumping, and narrowband Raman Spectroscopy.
Onda Series
The Onda Series is a DPSS nanosecond OEM laser platform aimed at high-end applications requiring both excellent beam quality and high peak power in materials such as metals, glass, plastics, and various delicate and hard materials. Developed initially as a high-energy seeder for advanced MOPA laser systems, the Onda is now available as a standalone device operating at the wavelengths of 266, 355, 532 and 1064nm. The compactness and ease of use allow for superior operation flexibility and performance / cost ratio.
Q-Spark
The Q-SPARK series, from Quantum Light Instruments Ltd., features a short <1.5 ns pulse with pulse energies up to 10 mJ. Due to the short cavity design, pulse durations of <800ps are achievable with pulse energies up to 5mJ. The innovative water-free laser crystal end-pumping technology produces a Gaussian-like, low divergence, high peak power laser beam in compact, air-cooled package.
Q1 Series
The Q1 series is a compact, energy-efficient, diode pumped, air-cooled, Q-switched laser available at 1064 and 1053nm with up to 45 mJ of pulse energy and rep rates up to 50Hz. The high peak powers and low divergence of the Q1 series enable efficient harmonic conversion through the 5th harmonic (213 or 211nm). The innovative laser design has resulted in a user-friendly, turnkey system that requires little maintenance.
Q2 Series
The Q2 series is a versatile, diode pumped, air-cooled, Q-switched laser capable of achieving up to 80mJ of pulse energy with an operational rep rate up to 100Hz. Available at the fundamental wavelengths of 1064 and 1053nm, the innovative water-free laser crystal end-pumping technology produces Gaussian-like, low divergence laser beams with high peak powers, enabling efficient harmonics conversion through the 5th harmonic.
Q2HE Series
The Q2HE series, from Quantum Light Instruments Ltd., features an innovative water-free laser crystal cooling technology that enables generation of high quality laser beams with up to 100 mJ pulse energy and/or up to 4 W of average output power. Featuring a pulse duration of less than 7 ns and a low beam divergence, the Q2HE is capable of achieving efficient fundamental wavelength conversion through the 5th harmonics of 213/211 nm.
R Series
The R series of wavelength stabilized single mode and multimode laser diodes offer narrow wavelength spectrum in wavelengths from 633nm thru 1064nm. Package options range from components as basic as a TO-56 or 14-pin BF packaged diodes, to OEM modules including electronics, to UL/CE and IEC certified turn-key systems.
RPK Series
The RPK Series of multiple single emitter fiber coupled diode lasers are available in wavelengths from 405nm thru 1550nm with up to 300W output powers. These multi-emitter high power and high brightness diode lasers include options for aiming beam, photo detector, TEC, fiber detector, thermistor and a variety of package types.
RWLD Series
The RWLD series of laser diodes are available in a wide range of wavelengths, power levels, and packages. The RWLD wavelength options span from 405nm to 1650nm, with output powers in the range of 10 mW to 300 mW, packaged in a TO-18 package with photodiode. Custom wavelengths, powers, and packages upon request.
RWLP Series
The RWLP series of fiber coupled laser diodes are variable in both multimode and single mode configurations, with wavelengths from 405nm thru the IR. The highly reliable RWLP series is suitable for a variety of applications such as biological and analytical instrumentation.
Microchip Series
The Microchip Series, from BrightMicroLaser, are ultra-compact, passively q-switched, single longitudinal mode (SLM), narrow linewidth, DPSS lasers that feature pulse durations from 400 ps to 2 ns, energy levels up to 80 uJ and repetition rates up to 100 kHz. In addition to the fundamental 1064 nm wavelength and its harmonics (532, 355 and 266 nm), we also deliver units emitting at 946 and 473 nm.
Sirius Series
SIRIUS is a very compact, high energy hybrid ultrafast laser for advanced micro-machining applications and supercontinuum pumping, offering over 120µJ and > 5 W, with pulses below 10 ps from single shot to 1MHz and an M² of < 1.2. This laser series specifically designed to allow for ergonomic and user-friendly operation. SIRIUS is ideally suited for selective ablation, electronics, and photonic applications.
SOL Series
The SOL Series is the most compact Q-switched Diode Pumped Solid State laser available in the power range from 6W to 40W @ 1064nm. Sol versions @ 532nn are also available with the same footprint. These air-cooled DPSS lasers are offered in a rugged and lightweight Single Unit, designed to allow easy and reliable integration in micro-machining and marking applications. Compactness, insensitivity to environmental conditions and ease of handling guarantee superior operation flexibility and performance/cost ratio.
Vento Series
The Vento Series of sub-ns DPSS active Q-Switched lasers produce pulses in the hundreds of ps range with average power up to 50 W @ 532 nm and up to 100 W @ 1064 nm. Ideal for micromachining, fine cutting and precision LIDAR, all the models are enclosed in an extremely compact and ruggedized single unit with both air-cooled and water-cooled options available.
Wedge Series
The Wedge series of DPSS Lasers have been designed for OEM applications like micro machining of hard and soft materials, specialty marking, glass and crystals engraving, LIDAR, LIBS, Spectroscopy and medical diagnostics. High peak powers, with relatively low energy and heat generation, allows efficient ablation and non-linear interaction with most materials. The compact and lightweight package represents a great benefit in LIDAR and other aerospace applications, while short pulses give extremely precise time-of-flight measurements.
Second Harmonic (532 nm output) and wavelength conversion option widen the product application range.
Source: https://www.rpmclasers.com/wavelength/1064nm-lasers/
0 Response to "Continuous Wave 1064nm Laser for Laser Voltage Imaging and Probing Applications"
Post a Comment